Instruction manual

American DJ® - www.americandj.com - Accu Scan 250™ Instruction Manual Page 39 American DJ® - www.americandj.com - Accu Scan 250™ Instruction Manual Page 40
Accu Scan 250™ Gobo Replacement
This unit comes with interchangable gobos. Changing the
gobos is a easy procedure. Follow the instructions below.
Caution! Never open the unit when in use. Always disconnect
the main power before attempting to change the gobos.
1. To change the gobo, you must remove the top half of the
units body. The top half of the body has the LED display on it
2. Unscrew the four phillips screws on the front of the body.
Remove the top half shell of the body.
3. When you remove the top shell you will be able to access the
gobo wheel. Turn the wheel with your hand until you come
across the gobo you would like to change.
4. Remove the fixation-ring with a small flat-head screwdriver
or pair of needle nose pliers. Push the gobo out towards the
front. When doing this you do not need a lot of pressure.
5. Change the gobo, replace the fixation-ring, and reassemble
the unit.
Accu Scan 250™ DMX Traits cont.
Channel Value Function
7 RESET/INTERNAL PROGRAMS
0 - 19 COLOR CHANGE NORMAL
20 - 39 COLOR CHANGE TO ANY POSITION
40 - 79 NO ROTATION
80 - 84 ALL MOTORS RESET
85 - 87 SCAN MOTOR RESET
88 - 90 COLOR MOTOR RESET
91 - 93 GOBO MOTOR RESET
94 - 96 SHUTTER & DIMMER MOTOR
RESET
97 - 99 NO ROTATION
100 - 119 INTERNAL PROGRAM 1
120 - 139 INTERNAL PROGRAM 2
140 - 159 INTERNAL PROGRAM 3
160 - 179 INTERNAL PROGRAM 4
180 - 199 INTERNAL PROGRAM 5
200 - 219 INTERNAL PROGRAM 6
220 - 239 INTERNAL PROGRAM 7
240 - 255 SOUND ACTIVE
8 SPEED OF PAN/TILT MOVEMENT
0 - 225 MAX. TO MIN. SPEED
226 - 235 BLACKOUT BY MOVEMENT
236 - 245 BLACKOUT BY WHEEL MOVEMENT
246 - 255 NO FUNCTION