Instruction manual
American DJ® - www.americandj.com - Accu Scan 250™ Instruction Manual Page 28American DJ® - www.americandj.com - Accu Scan 250™ Instruction Manual Page 27
Accu Scan 250™ System Menu
5. Press the UP button to display “ON” to activate this function,
or “OFF” to deactivate this function.
6. Press ENTER to conrm.
7. Press MODE/ESC to return to the main menu.
When you exit this function, the unit will begin to reload
data.
VER - Use this function to display the Software version of
the unit.
1. Access the main menu.
2. Tap the UP button until “SPEC” is displayed, press ENTER.
3. Tap the UP button until “VER” is displayed, press ENTER.
4. The display will show “V-X.X”, “X.X” stands for the version
number, such as the display may show “V-1.0”, “V-9.9” etc.
5. Press the MODE/ESC button to exit.
ADJU - Use this function is used to make sure all motors
are aligned and to adjust any motors that are not.
1. Access the main menu.
2. Tap the UP button until “SPEC” is displayed, press ENTER.
3. Tap the UP button until “ADJU” is displayed, press ENTER.
4. Tap the UP button until “CODE” is displayed, press ENTER.
5. The display will show “CXXX”, were as “XXX” represents the
calibration password. The calibration password is “C050.” Use
the UP or DOWN buttons to enter the proper password.
6. Once the proper password is entered the display will read
“CHXX”, were as “XX” represents the xture channel number, in
the case of the Accu Scan 250 1-8.
7. Select the desired channel to be calibrated by pressing the
UP or DOWN buttons and then ENTER to conrm.
8. The display will then read “XXXX”, were “XXXX” stands for
the calibrate values.
9. Adjust the desired calibration value between –128 and 127
by pressing the UP and DOWN. As you scroll up and down
through the calibration values you will
notice slight changes in the wheel or motor you are attempting
to calibrate.
10. Once you reach your desired calibration press ENTER to
conrm and lock in your calibration.
11. Once you are completely nished press MODE/ESC to
return to the main menu.
Accu Scan 250™ System Menu