Instruction manual

American DJ® - www.americandj.com - Accu Scan 250™ Instruction Manual Page 24American DJ® - www.americandj.com - Accu Scan 250™ Instruction Manual Page 23
Accu Scan 250™ System Menu Accu Scan 250™ System Menu
1. Access the main menu.
2. Tap the UP button until “RTLT” is displayed, press ENTER.
3. Press ENTER, the display will show “ON/OFF”.
4. Press the UP button to select “ON” to activate this function,
or “OFF” to deactivate this function.
5. Press ENTER to conrm.
6. Press MODE/ESC to return to the main menu.
MIC MENU -
MIC - The internal microphone can be made more or less
sensitive.
1. Access the main menu.
3. Tap the UP button until “MIC” is displayed, press ENTER.
4. The display will show “M-01”.
5. Press the UP or DOWN button to adjust the microphone sen-
sitivity between “M-01 - M-99”.
6. Press ENTER to conrm when you have reached your
desired microphone sesitivity level.
7. Press MODE/ESC to return to the main menu.
DISP MAIN MENU -
VALU Display the DMX-512 value of each channel -
1. Access the main menu.
2. Tap the UP button until “DISP” is displayed, press ENTER.
3. Tap the UP button until “VALU” is displayed, press ENTER.
4. The display should show “D-00”. Press the UP button in
order to select the desired channel. If you select “D-05” the
display will only show the DMX value of the 5th channel
5. Press ENTER to conrm.
6. Press MODE/ESC to return to the main menu.
Now the display will change as per the 5th channel DMX
value.
D ON Shuts off digital display after 2 minutes.
1. Access the main menu.
2. Tap the UP button until “DISP” is displayed, press ENTER.
3. Tap the UP button until “D ON” is displayed, press ENTER.
4. “CLDI” should now be displayed, press ENTER.
5. The display will show “ON/OFF”. Press the UP button to
select “ON” to activate this function, or “OFF” to deactivate this
function.
6. Press ENTER to conrm.
7. Press MODE/ESC to return to the main menu.
FLIP - This function will reverse the display 180º.
1. Access the main menu.
2. Tap the UP button until “DISP” is displayed, press ENTER.
3. Tap the UP button until “FLIP” is displayed.
4. Press ENTER, the display will show “ON/OFF”.
5. Press the UP button to select “ON” to activate this function,
or “OFF” to deactivate this function.
6. Press ENTER to conrm.