Instruction manual
Accu Scan 250™ System Menu Accu Scan 250™ System Menu
©American DJ® - www.americandj.com - Accu Scan 250™ Instruction Manual Page 22American DJ® - www.americandj.com - Accu Scan 250™ Instruction Manual Page 21
GOBO With this function you can reset the gobo wheel
motor.
1. Access the main menu.
2. Tap the UP button until “RESE” is displayed, press ENTER.
3. Tap the UP button until “GOBO” is displayed.
4. Press ENTER to reset.
SHTR With this function you can reset the shutter motor.
1. Access the main menu.
2. Tap the UP button until “RESE” is displayed, press ENTER.
3. Tap the UP button until “SHTR” is displayed.
4. Press ENTER to reset.
TINE MAIN MENU -
LIFE - With this function you can display the running time
of the unit.
1. Access the main menu.
2. Tap the UP button until “TIME” is displayed, press ENTER.
3. Tap the UP button until “LIFE” is displayed, press ENTER.
4. The display shows the running time of the unit.
5. Press MODE/ESC to return to the main menu.
LAMP - With this function you can display the running time
of the lamp.
1. Access the main menu.
2. Tap the UP button until “TIME” is displayed, press ENTER.
3. Tap the UP button until “LAMP” is displayed, press ENTER.
4. The display shows the running time of the lamp.
5. Press MODE/ESC to return to the main menu.
CLMP - With this function you can clear the running time of
the lamp. Note Very Important: Please clear the lamp time
every time you replace the lamp.
1. Access the main menu.
2. Tap the UP button until “TIME” is displayed, press ENTER.
3. Tap the UP button until “CLMP” is displayed.
4. Press ENTER to clear the lamp time, or press MODE/ESC to
return to the main menu.
RPAN MAIN MENU -
RPAN - The movement of the tilt will be reversed.
1. Access the main menu.
2. Tap the UP button until “RPAN” is displayed, press ENTER.
3. The display will show “ON/OFF”.
4. Press the UP button to select “ON” to activate this function,
or “OFF” to deactivate this function.
5. Press ENTER to conrm.
6. Press MODE/ESC to return to the main menu.
RTLT MAIN MENU -
RTLT - The movement of the Tilt will be reversed.