User`s manual

2. Operation Guide
2.4.4 Delete a scanner of DMX channels
2. Operation Guide
2.4.5 Clear all DMX channels
2.4.6 Display DMX channel
1. Activate Assign or Reverse mode(Described in
the sub-chater 2.4.1 or 2.4.2).
2. Tap the Scanner button to select the scanner you
wish to delete.
3. Press the Mode and Auto/Del buttons at a time,
all LEDs should flash briefly, indicating the scanner
is deleted.
1. Turn the power off.
1. Press the Fine and Mode buttons at a time,
the Assign LED lights.
2. Press the Mode and Auto/Del buttons
at a time
3. While pressing the two buttons, apply the
power again, all LEDs should flash briefly,
indicating all assigned or reversed DMX
channel are cleared
2827
SCANNER
MODE
MODE
Auto/Del
Auto/Del
FINE
MODE