User Manual

Bank copy & Fixture copy

Bank copy

(1) Enter the Program mode.

(2) Use the Bank UP/DOWN buttons to select the bank to be copied.

(3) Tap the Midi/Rec button, and then use the Bank UP/DOWN buttons to select the

bank that you want to copy to.

(4) Tap the Music/Bkc button. All LED's will flash three times to confirm your bank

copy operation.

Fixture copy

(1) Enter the Program mode.

(2) Press the Fixture # button, 1-12, that you wish to copy.

(3) Using channel faders 1-8, data wheels or joystick, set your look for the light.

(4) Press and hold down the same Fixture button, then tap the Fixture # button

that you want to copy the same settings to.

Fade Time

(1) Press and hold down the MODE button, then tap the Tap/Disp button. The

LED-display will display "OnLy" or "ALL", for 3 seconds, depending on the current

setting. "OnLy" indicates that the Pan/Tilt channels will only be affected by the fade

time fader while "ALL" indicates that all channels will be affected by the fade time

fader.

(2) To change this setting, tap the Tap/Disp button while pressing and holding down

the Mode button. Doing so, should switch between the OnLy and ALL options.

DMX OPERATOR 384