User Manual

Press the AUTO/Del button, the Auto Trigger indicator light will illuminate in the

LED-display. This indicates you that you are now in the Auto trigger mode.

(1)

Press the Chase # button, 1-12, that you wish to playback. The selected Chase

LED should illuminate and begin to play. You can select more than one chase #

button at a time to create a chase sequence.

(2)

At any time, you can adjust the Speed and Fade fader to set your chase

playback state. You can also press the Tap/Disp button twice to establish a

chase rate. The rate will be determined by the tempo at which you press the

Tap/Disp button.

(3)

2. Auto trigger:

3. Audio trigger:

Press the Music/Rec button, the Audio Trigger indicator light will illuminate in

the LED-display. This indicates you that you are now in the Audio trigger mode.

(1)

Press the Chase # button, 1-12, that you want to playback. The selected Chase

LED should illuminate and engage. The selected chase will trigger to sound via

the internal microphone or to audio via the line level input if connected. Pressing

the Music/Rec button again will disengage audio mode.

(2)

DMX OPERATOR 384