User's Manual

ADJ Products, LLC • Los Angeles, Ca USA • Kerkrade, Netherlands

Art-Net Universe

When selecting the Art-Net protocol, the Net and Sub-Net addresses for the bridge can be selected.

This is an address Art-Net uses to identify Art-Net devices on a network. The 4 Stream DMX Bridge

will appear as an Art-Net node when using Art-Net discovery from a compatible lighting application.

Each node must have a Net number from 0 to 127 and a Sub-Net number from 0 to 15 assigned to it.

In addition, any Art-Net node can support up to four DMX-512 outputs. The 4 Stream DMX Bridge

always assigns Art-Net universe numbers 0-3 to its four DMX outputs. The default setting for Net and

Sub-Net is 0, which will work fine if the 4 Stream DMX Bridge is being used as the one and only Art-

Net node. If more than one 4 Stream DMX Bridge or any other Art-Net nodes are being used in the

network, different values must be set for each node.

For example, set the first node to Sub-Net 0 and the second node to Sub-Net 1, etc.

(Net can be left at 0 for the first 16 nodes)

Art-Net Name

Edit the name for the 4 Stream DMX Bridge that will appear on an Art-Net node list in the compatible

controller application. This is referred to as the Art-Net short name.

When using more than one 4 Stream DMX Bridge, changing the Art-Net short name is

required in order to easily differentiate one unit from another.

Art-Net universe

Net 0 SubNt 0

Art-Net name

ADJ 4 Stream