User's Manual

ADJ Products, LLC • Los Angeles, Ca USA • Kerkrade, Netherlands
10
Initial Power On
When the 4 Stream DMX Bridge is powered ON for the first time, it will be configured in the default
mode. It will create a local Wi-Fi access point, which should be available to any Wi-Fi equipped device,
and appear in a list of local networks as ADJ 4 Stream DMX.
The default password is 4 Stream. Join this network from the Wi-Fi equipped device in the normal
fashion. The default DMX512 network protocol is Art-Net. If a Wi-Fi device is connected and running
an Art-Net supported application, the 4 Stream DMX Bridge should be discoverable as an Art-Net
node with four DMX outs. Art-Net discovery and support will be different for each application, so
consult the application’s instructions on how to connect and configure using the Art-Net settings for
that app. The 4 Stream DMX Bridge can be configured using the LCD and menu buttons to access its
various settings, which is explained in detail in the following sections.
No Activity
After a period of no activity, the LCD backlight turns off and displays the default message below.
Press any of the control buttons under the LCD display to turn the LCD backlight back ON.
Created Network
ADJ 4 Stream DMX
ADJ 4 Stream
DMX Bridge V-3