ADC Neurological Instruments ® Hammers and Tuning Forks Directions for Use ®
A Special Thank You... Thank you for choosing an ADC® Neurological Instrument. We’re proud of the care and quality that goes into the manufacture of each and every product that bears our name. Only the finest materials are used to assure you of a timeless instrument designed for optimum performance. Please read the following instructions and general information which will prove helpful in allowing you to enjoy your ADC® product.
Select models (Buck Hammer - 3691 and Babinski Hammer - 3697) have concealed needles and/or brushes for additional reflex and neurological testing. To use these components, unscrew the base of the hammer’s handle. For Buck Hammers, the concealed needle can be accessed by unscrewing the top of the device and pulling the needle free. Operation (For all Tuning Forks): To operate your tuning fork, hold it as close as possible to the end.
When using a tuning fork to examine a patient, the device should be held in such a way that it is in the same orientation as the patient. The tines of the tuning fork will give off more vibrations that the patient can hear when oriented like this. See the image below for more details. Cleaning and Disinfection: Your neurological instrument may be cleaned with a soft cloth or cotton swab. A low-level disinfectant comprised of 70% isopropyl alcohol may be used as necessary during the cleaning process.
