User guide

MDVR User Guide
- -
39
Alarm Setup
Your MDVR supports sensor monitoring from up to 4 separate sensors. For example, you may
want to know if the back door of the vehicle is open, etc.
I/O Input
Select Alarm>>I/O. Press 【ENTER】keys to change between any fields in the menu
Source: The name of the signal connected to the DVR. The names of the signals are
entered using the data entry keyboard and are limited to 8 characters.
Name: The characters that are displayed on the Installers Mode Page. The displayed
characters of the signals are entered using the data entry keyboard, and are
limited to 2 characters.
Level: Active HIGH, active LOW, or OFF for Sensors 1-8, N.O. (normally open circuit),
N.C. (normally closed), or OFF for ENSOR 9.
Alarm: ON or OFF
To select【ENTER】to store vehicle information in working and 【EXIT】to discard all changes.