User guide

MDVR User Guide
- -
34
to setup features while the Administrator has full access to all configuration options. CAUTION: DO
NOT LOSE THE ADMINISTRATOR PASSWORD.
Select SECURITY. Press【ENTER】key to setup USER password.
PASSWORD ENABLE: Selecting “ENABLE” will require a password in order to access the
setup menu. Selecting “DISABLE” will not require a password. Administrator has full rights and a
User has limited rights to view.
• Password Enable: Press 【ENTER】 to switch between "YES” and “NO” .
• User Password: Enter the desired password and confirm. The password must be 6
numerical characters in length. Use the NUMERIC keypad on the
handheld to input the values.
• Confirm Password: Re-enter: must be same input as User password, otherwise the
system would not accept the password setting when password
does not match between first lines and re-entered line.
Press the down CURSOR to highlight the administrator password entry line.
• Admin Password: Enter the desired password and confirm. The password must be 6
numerical characters in length. Use the NUMERIC keypad on the
handheld to input the values.
• Confirm Password: must be same input as Admin password, otherwise the system
would not accept the password setting when password does not
match between first lines and re-entered line..