User guide

MDVR User Guide
- -
20
Note: Regardless what MDVR Power Connection you select, Recording must be after Power On.
Record Mode Reference List
Power
Connection
Record
Mode
Start Record
End Record
Ignition
When Ignition Switch towards
ACC, MDVR will start record at
once
When Ignition Switch towards
LOCK, MDVR will end record at
once
Timer
MDVR will start recording as
the definite time in P.24.
(The start time in schedule
must be later than ignition
time.)
MDVR will end recording as
the definite time in P.24
(The end time in schedule must
be later than time.)
Ignition
Alarm
When Ignition Switch towards
ACC, MDVR will not record until
sensor/alarm is triggered in
P.41-P43.
If alarm Pre-record is ON in
P.21, you can get 5-25 seconds
record before alarm is triggered
each time.
MDVR will stop record after
5-600 Seconds of Delay Record
each time in P. 21.
When Ignition Switch towards
LOCK, MDVR will end record at
once
Ignition
MDVR will start recording as
the definite time in P.24
MDVR will end recording as
the definite time in P.24
Timer
If you need MDVR start
recording later than POWER
ON, you need setup a later
time in Record Schedule as
P.24
If you need MDVR end
recording earlier than POWER
OFF, you need setup a earlier
time in Record Schedule as
P.24
Timer
Alarm
MDVR will not record until
sensor/alarm is triggered in
P.41-P43. If alarm Pre-record is
ON in P21, you can get 5-25
seconds record before alarm is
triggered each time.
MDVR will stop record after
5-600 Seconds of Delay Record
each time in P. 21.
Turn you Ignition Switch towards
LOCK, MDVR will end record at
once
Timer
MDVR will start recording as
the definite time in P.24
MDVR will end recording as
the definite time in P.24
Standby
Alarm
MDVR will not record until
sensor/alarm is triggered in
P.41-P43. If alarm Pre-record is
ON in P21, you can get 5-25
seconds record before alarm is
MDVR will stop record after
5-600 Seconds of Delay Record
each time in P. 21. Turn you
Ignition Switch towards LOCK,
MDVR will end record at once