User guide

MDVR User Guide
- -
13
MDVR System Power Connection
 Ignition Mode: Recommend! Ignition mode allows MDVR to be Power On or Off as long as
you start or shutdown vehicle. You also need setup startup recording mode in Record
>>General, then decide when the MDVR start recording.
 Timer Mode: Timer Mode allow MDVR be Power On or Off following the starting time and
shutdown time you set in MDVR startup mode in General>>Vehicle. Then select the
startup-recording mode in Record>>General.
 Standby Mode: This mode allows MDVR keep Power On all the time only if vehicle battery
can off enough power. Then select the startup-recording mode in Record>>General.
Battery
＋
-
DC－ Black Cable
DC＋ Red Cable
MDVR
Battery
＋
-
MDVR
Ignition
Switch
.
ACC Yellow Cable
DC＋ Red Cable
DC－ Black Cable
Battery
＋
-
MDVR
Ignition
Swith
DC－ Black Cable
DC＋ Red Cable
ACC Yellow Cable
ACC Yellow Cable