User/Installation Manual RemotePro KP MODEL 12-000sg “Your Partner in Access Control” www.americanaccess.
AAS 2Year Limited Warranty What item(s) this warranty applies to: American Access Systems RemotePro (12-XXXX series)” access controls.. What is covered: Any defect in materials or workmanship. For how long: Two years from date of purchase. What we will do: If your AAS product is defective and returned within 2 years of the date of purchase, we will repair it or, at our option, replace it at no charge to you. If we repair your AAS product, we may use new or reconditioned parts.
Technical/Customer Support 1-303-799-9757 or techsupport@securitybrandsinc.com BEFORE PROCEEDING To take full advantage of the 24 month limited warranty, you must be registered with American Access Systems. Please read the enclosed warranty statement, (pg 2), fill out the warranty registration card provided, and send it to: SECURITY BRANDS INC 1675 West Yale Ave. Englewood, CO 80110 phone: 303-799-9757 fax: 303-799-9756 sales@securitybrandsinc.com www.securitybrandsinc.
STEP 1-MOUNTING THE UNIT Mounting the unit to your own pedestal The 12-000sg is designed to mount in a standard 2 x 4 electrical box. Two security screws are provided to prevent tampering. American Access Systems can provide the proper tool to install these screws for a additional cost. They are standard (snake eyes) screws. Once you have made your connections, fold the wires into the box and secure the keypad being careful not to pinch any wires between the box and keypad panel.
THE IDLE MODE The idle mode is the mode of operation in which the unit sits and waits for data from the keypad. When a key is pressed you will have approximately 3 seconds between keypresses before the unit resets. THE LED’s The yellow LED serves as a ready indicator and stays lit while the 12-000 is waiting for data from the keypad. When a key is pressed the yellow led will go out until either 5 numeric keys are pressed on the keypad or a time of 3 seconds is exceeded between keypresses.
THE IDLE MODE The idle mode is the mode of operation in which the unit sits and waits for data from the keypad. When a key is pressed you will have approximately 3 seconds between keypresses before the unit resets. THE LED’s The yellow/green LED serves as a ready indicator and stays lit while the REMOTE PRO is waiting for data from the keypad. When a key is pressed the yellow/green led will go out until either 5 numeric keys are pressed on the keypad or a time of 3 seconds is exceeded between keypresses.
Customer Service and Tech Support Customer Service: 303-799-9757 Customer service is available free of charge. Hours are 8:00 a.m. to 4:30 p.m. MST. If you call, please have your Model and Serial Number to help our Technicians assist you. E-Mail: customerservice@securitybrandsinc.com Technical Support: 303-799-9757 Technical support is available free of charge. Hours are 8:00 a.m. to 4:30 p.m. MST. If you call, please have your Model and Serial Number to help our Technicians assist you.
“Your partner in access control” www.securitybrandsinc.
