Owner manual
Page 9 American Access Systems / Security Brands, Inc.
PROGRAMMING
A person desiring access to the program mode will enter the present MASTER CODE. If the master code is valid
the yellow LED will come on and the individual will be prompted with a QUICKBEEP to enter a 3 digit number
corresponding to a SUBMODE. There are 4 groups of SUBMODES. Group 100 is for PROGRAMMING CODES, group 200
is for DELETING CODES, group 300 is MISCELLANEOUS SETTINGS and GROUP 400 is PRINT FUNCTIONS. There are a total
of 26 different submodes to choose from. They are as follows:
GROUP 100 SUBMODES (PROGRAMMING CODES)
SUBMODE DESCRIPTION
100 Program Access Cards (Block Format)
101 Program Managers Card(s) (Block Format)
102 Program Sleep Card(s) (Block Format)
103 Program Relay A Latch Card(s) (Block Format)
104 Program Relay B Latch Card(s) (Block Format)
105 Program Relay B Card(s) (Block Format)
106 Set System Facility Code (3 max.)
108 Change System Master Code
109 Change Quick Entry Master Code
110 Change Quick Delete Master Code
GROUP 200 SUBMODES (DELETING CODES)
SUBMODE DESCRIPTION
200 Delete Cod Delete Card(s) (Block Format)
299 Clear APB status
GROUP 300 SUBMODES (MISCELLANEOUS)
SUBMODE DESCRIPTION
300 Set Relay A Output Time (1/2 to 99 seconds)
301 Set Relay B Output Time (1/2 to 99 seconds)
302 Set Clock Time (Military Format)
GROUP 400 SUBMODES (PRINT FUNCTIONS)
SUBMODE DESCRIPTION
400 Print Audit Trail (Entire Contents of History Buffer)
401 Print Out All Current Access Cards
402 Print Audit Trail on Specic Card
403 Set Printer Baud Rate
404 Red Printing on Invalid Cards (For AAS idp562 Citizen Printer Only)
405 Print Out Current Unit Conguration (Prints out Status of Split Relay,
APB, Current Baud Rate, All Manager’s and Second Relay Cards)
499 Clear Entire History Buffer