Instruction Manual
SK-ACP Installation & Operating Manual
FACTORY SETTINGS
When shipped from the factory, the SK-ACP has the following settings:
Facility Code None*
All Cards Time Zone 0 (void)
No Limited Use Cards
Settings Latch timer = 1 Second
APB Timer = 0 Minutes (off)
Baud Rate = 38,400*
Reader ID = (none)
Password = 12345*
Date = Undetermined*
Time = Undetermined*
Time Zones APB = Timed Hard*
Date Restrictions = None
0 = Always Void
1 = Always Valid (no restriction)
2 = Mon - Fri, 8am - 5:30pm
3 = Mon - Fri, 6am - 6pm
4 = Sat & Sun, 24 hours
5 = Sat & Sun, 6am - 6pm
6 = Always Valid (Timed Antipassback)
7 & Up = Mon-Sun, 6am - 6pm
Door Zone Off For All Time Segments
Holidays None Set
Daylight Savings
Correction Automatic*
Inputs 1 Door Monitor
2 Disabled
Auxiliary Output Disabled
Anti-Passback Parameters
Reader (In/Out) None
Daily APB Forgive Hour 00
* Common to Panel, all other settings are per reader (2 readers per panel)
11