User/Installation Manual ADVANTAGE DKS II with Advantage RCG Technology MODEL 24-1000D “Your Partner in Access Control” www.americanaccess.
AAS 2Year Limited Warranty What item(s) this warranty applies to: American Access Systems “ADVANTAGE DKS II (24-XXXX series)” access controls. What is covered: Any defect in materials or workmanship. For how long: Two years from date of purchase. What we will do: If your AAS product is defective and returned within 2 years of the date of purchase, we will repair it or, at our option, replace it at no charge to you. If we repair your AAS product, we may use new or reconditioned parts.
PARTS CHECKLIST Enclosed with this box you should have the following items. Qty Description 1 Desk Station 1 Wall Plug In Transformer If any of the above items are missing from this box, contact American Access Systems Tools Needed For Basic Installation •• •• •• Wire strippers Wire cutters Digital or Analog multi-meter Technical/Customer Support 1-303-799-9757 or techsupport@securitybrandsinc.com Page 3 American Access Systems / Security Brands, Inc.
BEFORE PROCEEDING To take full advantage of the 24 month limited warranty, you must be registered with American Access SystemsS. Please read the enclosed warranty statement, (pg 2), fill out the warranty registration card provided and send it to: SECURITY BRANDS INC 1675 West Yale Ave. Englewood, CO 80110 phone: 303-799-9757 fax: 303-799-9756 sales@securitybrandsinc.com www.securitybrandsinc.
STEP 2-SYSTEM CONNECTIONS HOOKUP STEPS ACCESS CONTROL UNIT (ACU) STEP 2 -SYSTEM CONNECTIONS HOOKUP STEPS CONTROL RELAYS PRINTER COMMUNICATIONS & RELAYS POWER HOOKUP (A). Make all your prox slave connections BEFORE you apply power to the master unit. To connect power to your new desk unit plug the wall tranformer into an outlet and insert the other end in the back of the unit. (B). Connect the device(s) to be controlled to the appropriate terminal(s)(Relay A or B) on the Communications and Relays Board.
USING A SLAVE WITH THE ADVANTAGE DKS II WIRE RECOMMENDATIONS: 6 CONDUCTOR, 22 GUAGE, TWISTED SHIELDED CABLE The ADVANTAGE DKS II communicates with two 12-000 slave keypads utilizing wiegand technology. NOTE: Do not run your gate control wires in the same shielded cable as your slave communication wires. There are two holes on the back of the unit which are for slave communication wires, and gate control wires.
FUNCTION CODES FUNCTION CODE DESCRIPTION “Master Code” This is a 5 digit programmable code between 00000 and 65535 used for gaining access to the program mode. The factory default is “0 1 2 5 1”. “Relay A Latch Card” This is a user programmable card(s) used to lock down (or unlock) relay A. This code will be used to hold open a gate or door connected to relay A. “Relay B Latch Card” This is a user programmable card(s) used to lock down (or unlock) relay B.
MASTER RESET Follow these steps precisely. If you make an entry error, the unit will ERROR and you will have to start over. (1). Disconnect power from the master board (2). Reconnect power to the board while holding down the (3). Release the reset button and enter * * * from the keypad. RESET BUTTON The unit will issue a GOODBEEP and the master code will be set back to 1 2 5 1. If the unit was locked in the sleep, lockA, or lockB mode, the unit will be released and returned to the idle state.
PROGRAMMING A person desiring access to the program mode will enter the present MASTER CODE. If the master code is valid the yellow LED will come on and the individual will be prompted with a QUICKBEEP to enter a 3 digit number corresponding to a SUBMODE. There are 4 groups of SUBMODES. Group 100 is for PROGRAMMING CODES, group 200 is for DELETING CODES, group 300 is MISCELLANEOUS SETTINGS and GROUP 400 is PRINT FUNCTIONS. There are a total of 26 different submodes to choose from.
GROUP 100 (PROGRAMMING CODES) “100” SUBMODE 100 (PROGRAM ACCESS CODES) HELPFUL HINT: REMEMBER, IF YOU DO NOT WANT TO COME UP WITH CODES YOURSELF THIS UNIT CONTAINS AN RCG FEATURE (RANDOM CODE GENERATION) SEE SUBMODE 304 AND 305. KEEP IN MIND YOUR NEW CODES MUST BE LESS THAN 65535 AND NOT ALREADY IN USE BY THE SYSTEM. PAGE 18 IN THIS MANUAL IS AN ACCESS CODE LOG SHEET WHICH MAY BE PHOTO-COPIED FOR KEEPING TRACK OF ALL CODES IN THE SYSTEM.
“103” SUBMODE 103 (PROGRAM SLEEP CODE) DESCRIPTION: The SLEEP MODE is the mode of operation in which the unit shuts down and goes to sleep. Only MANAGERS CODES are accepted into the system in this mode. The SLEEP CODE is accepted into the system from the master unit or either slave. Each time the SLEEP CODE is entered the sleep code, date, and time are logged into the history buffer and the unit toggles in and out of the SLEEP MODE.
GROUP 200 (DELETING CODES) “200” SubMode 200 (DELETE CODES) To delete any code from memory, with the exception of the MASTER CODE, enter the 5 digit “MASTER CODE” followed by submode “200” and then the code to be deleted. (MASTER CODE) + 200 + (CODE TO BE DELETED) + (NEXT CODE TO BE DELETED) etc...(# to exit) You may continue deleting codes in a successive manner. When you are finished press # to exit. Should you make an entry error, simply press the * key and reenter the correct data.
“303” SubMode 303 (SET CLOCK DATE) DESCRIPTION: The ADVANTAGE DKS II unit incorporates an on board 365 day a year calendar and also adjusts for LEAP YEAR. Years can be entered up to 2025. To set the clock date enter the 5 digit “MASTER CODE” followed by submode “303” then the “MONTH” and “DAY” and “YEAR”. Example: 06/20/95 = “06” + “20” + “95” 04/08/2003 = “04” + “08” + “03” The unit will respond with a GOODBEEP and exit from the program mode after the DATE has been accepted into the unit.
“306” SubMode 306 (TOGGLE 3 STRIKES ON/OFF) NOTE: From the factory, 3 strikes is disabled. DESCRIPTION: This feature is desirable to keep unwanted persons from successively entering codes until they “hit” a programmed access code. By selecting this function you enable a 1 1/2 minute lock out time if 3 incorrect codes are entered successively within a 3 minute period. When this occurs, the LED’s will flash and a high pitched alarm will be generated from the unit for 30 seconds.
“309” SubMode 309 (QUIET MODE) NOTE: From the factory, QUIET MODE is enabled. DESCRIPTION: If you want to hear the good or bad beeps at your desk when an access code is entered at the slave keypad you can disable the quiet mode.
“404” SubMode 404 (RED PRINTING ON INVALID CODES) This option is only available if you are using an AAS OM-200 printer. The option will print out every invalid code in red. This feature is disabled by default.
Access Name Page 17 American Access Systems / Security Brands, Inc.
MASTER BOARD RESET BUTTON CONNECTION FOR 12 VOLT BULB CONNECTOR FOR COMMUNICATIONS AND RELAYS BOARD PRINTER POWER TRANSFORMER PLUG-IN SEE PAGE 6 WIEGAND COLOR CODES FOR SLAVE INTERFACE COMMUNICATIONS AND RELAYS BOARD Page 18 American Access Systems / Security Brands, Inc.
Customer Service and Tech Support Customer Service: 303-799-9757 Customer service is available free of charge. Hours are 8:00 a.m. to 4:30 p.m. MST. If you call, please have your Model and Serial Number to help our Technicians assist you. E-Mail: customerservice@securitybrandsinc.com Technical Support: 303-799-9757 Technical support is available free of charge. Hours are 8:00 a.m. to 4:30 p.m. MST. If you call, please have your Model and Serial Number to help our Technicians assist you.
“Your partner in access control” www.securitybrandsinc.
