User/Installation Manual ADVANTAGE DKLP MODEL 19-100sg “Your Partner in Access Control” www.americanaccess.
AAS 2Year Limited Warranty What item(s) this warranty applies to: American Access Systems “DKLP 19-XXX series” access controls. What is covered: Any defect in materials or workmanship. For how long: Two years from date of purchase. What we will do: If your AAS product is defective and returned within 2 years of the date of purchase, we will repair it or, at our option, replace it at no charge to you. If we repair your AAS product, we may use new or reconditioned parts.
PARTS CHECKLIST Enclosed with this box you should have the following items.
STEP 1-MOUNTING THE UNIT Page 3 tells you what tools and instruments you will need to install your unit and presents a parts check list. Make sure to have all the tools listed. Upon opening the box, check off the items enclosed with the unit. If any items are missing from your unit, contact American Access Systems immediately. The 19-100sg mounts to a standard 2 x 4 electrical box.
THE MASTER CODE AND ACCESS CODES Depending on which model you have, your unit may be programmed with multiple (4 digit) ACCESS CODES, the number of access codes is reflected in the model number (eg. 19-100(i) = 100 access codes.). The MASTER CODE is a 4 digit programmable code used for accessing the program mode. Note: The model number of the unit is located on the inside face of the unit.
“3” Sub-Mode 3 (Change Master Code) To change the master code enter the PRESENT MASTER CODE, followed by 3, and then the NEW MASTER CODE. (PRESENT MASTER CODE) + 3 + (NEW MASTER CODE) Should you make an entry error, simply press the * key and re-enter the correct data. You may select any 4 digit code as your new master code that is not already in use by the system. The unit will respond with a GOODBEEP upon acceptance of the new master code and automatically exit from the program mode.
DKLP CIRCUIT BOARD DIAGRAM PROGRAM/RESET BUTTON POWER/CONTROL HARNESS (JP1) RELAY Page 7 American Access Systems / Security Brands, Inc.
MASTER CODE ____________ Page 8 American Access Systems / Security Brands, Inc.
Customer Service and Tech Support Customer Service: 303-799-9757 Customer service is available free of charge. Hours are 8:00 a.m. to 4:30 p.m. MST. If you call, please have your Model and Serial Number to help our Technicians assist you. E-Mail: customerservice@securitybrandsinc.com Technical Support: 303-799-9757 Technical support is available free of charge. Hours are 8:00 a.m. to 4:30 p.m. MST. If you call, please have your Model and Serial Number to help our Technicians assist you.
Notes Page 10 American Access Systems / Security Brands, Inc.
Notes Page 11 American Access Systems / Security Brands, Inc.
“Your partner in access control” www.securitybrandsinc.
