Manual

Page 3 American Access Systems / Security Brands, Inc.
PARTS CHECKLIST
Enclosed with this box you should have the following items.
Qty Description
1 Control Station
2 Security Screws
1 Installation Instructions
If any of the above items are missing from this box, contact American Access Systems
Tools Needed For Basic Installation
• • Wire nuts or appropriate connectors
• • Wire strippers
• • Wire cutters
• • Standard 2 x 4 electrical box
• • Digital or Analog multi-meter
TECHNICAL/CUSTOMER SUPPORT
1-303-799-9757 OR
[e-mail]
INTRODUCTION
Your new ADV unit is a high quality, commercial grade, programmable digital key control station. The unit
incorporates a single relay with a normally open and normally closed output. The ADV 100sg comesin a solid
aluminum faceplate and high quality keypad. Please be sure to read and understand all instructions before
proceeding with the hookup and programming instructions.
BEFORE PROCEEDING
To take full advantage of the 24 month limited warranty, you must be registered with American Access SystemsS.
Please read the enclosed warranty statement, (pg 2), ll out the warranty registration card provided and send it to:
1675 West Yale Ave.
Englewood, CO 80110
phone: [phone]
fax: [phone]
[e-mail]
www.securitybrandsinc.com
SECURITY BRANDS INC