User guide

Speedway Reader IPJ-R1000 for Gen 2 UHF RFID
56
ipInDelivers=22001
ipOutRequests=23126
ipOutDiscards=0
ipOutNoRoutes=0
ipReasmTimeout=0
ipReasmReqds=0
ipReasmOKs=0
ipReasmFails=0
ipFragOKs=0
ipFragFails=0
ipFragCreates=0
ipRoutingDiscards=0
The command usage for show network ntp is shown below:
Usage: show network ntp
Table 7-22 "show network ntp" Response Parameters
Parameter Name Format Description
NtpServerAddress1Stat STRING
Address of the first statically
added NTP server
NtpServerAddress2Stat STRING
Address of the second
statically added NTP server
… … …
NtpServerAddress<N>Stat STRING
Address of the last NTP
server
NtpServerAddress1Dyn STRING
Address of the first NTP
server obtained from DHCP
server
NtpServerAddress2Stat STRING
Address of the second
dynamic NTP server
obtained from DHCP server
… … …
NtpServerAddress<N>Dyn STRING
Address of the last NTP
server obtained from DHCP
server
A sample command is shown below:
> show network ntp
Status=0,’success’
NtpServerAddress1Stat=140.142.16.34
The command usage for show network summary is shown below:
Usage: show network summary