User guide

Speedway Reader IPJ-R1000 for Gen 2 UHF RFID
51
Network is down
7.5.3.3. show logging summary Command
The show logging summary command displays the current logging configuration for syslog and for the internal log. The
command usage is shown below:
Usage: show logging summary
Response parameters for the logging summary command are shown in
Table 7-16.
Table 7-16 "show logging summary" Response Parameters
Parameter Name Format Description
ApplicationLevel
Configured the level at and above which
application-level logs are sent to the log
database
ConfigurationLevel Log level for configuration
MgmtLevel Log level for management
NetworkLevel Log level for networking
RFIDParameters Log level for RFID parameters
RFIDSingulation Log level for RFID singulation
RFIDAccess Log level for RFID access
System Log level for system
severityLevel
<Emergency|
Alert |
Critical |
Error |
Warning |
Notice |
Info |
Debug>
The syslog security level. Only logs at or above
this level will be forwarded to syslog.
A sample of the command is shown below:
> show logging summary
Status=0,'Success'
ApplicationLevel=critical
ConfigurationLevel=emergency
MgmtLevel=emergency
NetworkLevel=emergency
RFIDParameters=emergency
RFIDSingulation=emergency
RFIDAccess=emergency
System=emergency
severityLevel=warning
>
7.5.4. show network Command
The show network menu contains commands to display networking parameters and statistics. All commands are single word
commands and take no arguments. Commands, with their usage format, are shown below, while the response parameters are
shown in Table 7-17 through Table 7-25.