User guide

Speedway Reader IPJ-R1000 for Gen 2 UHF RFID
48
Table 7-14 "show image" Response Parameters
Parameter Name Format Description
The upgrade status of the last executed upgrade
<Idle | The reader is idle in terms of upgrade.
Contacting Server |
Contacting server: reader is contacting server for file
download.
Downloading | Downloading: File is being downloaded.
Download Failed |
Download Failed: Failed to download either the
metafile or the upgrade image.
Bad Config |
Bad Config: The upgrade configuration metafile is
invalid.
Bad Image | Bad Image: The image downloaded is invalid.
No Upgrade | No Upgrade: No need to upgrade
Erasing |
Erasing: Reader is erasing flash memory before writing
new image.
Programming |
Programming: Reader is programming new image into
flash memory.
Done | Done: Upgrade is complete.
Set Metafile Failed | Set Metafile Failed: The configureUri command failed.
Set Upgrade Failed | Set Upgrade Failed: The updateUri command failed.
FDR Failed | FDR Failed: The factory command failed.
Set RetrieveMode
Failed |
Set RetrieveMode Failed: The retrievemode command
failed.
UpgradeStatus
Failed >
Failed: Any other failures not covered above. Usually
explained by Reason field
This supplements the upgradeStatus field to give a reason for the status
<Unknown Host | Unknown Host: Download failed due to unknown host.
Unsupported
Scheme |
Unsupported Scheme: Download failed due to
unsupported URI scheme (only FTP, HTTP and TFTP
are supported).
Syntax Error | Syntax Error: Metafile has syntax error.
Timeout | Timeout: download timed out.
File Not Found | File Not Found: Download file not found.
Access Denied |
Access Denied: Download failed due to access denied
by server, e.g., bad password.
Not Matching
Metafile |
Not Matching Metafile: Bad upgrade image due to its
not matching metafile.
Bad File Format |
Bad File Format: Bad upgrade image file format.
Bad CRC | Bad CRC: Bad image CRC.
Bad Hw Version | Bad Hw Version: Image Hw version not matching the
reader.
No Newer Version |
No Newer Version: Upgrade not needed due to no
newer version in metafile or upgrade image.
File Mismatch |
File Mismatch: Metafile has mismatched partition
image types.
No File |
No File: Metafile does not contain upgrade file
information.
Missing SOP |
Missing SOP: Metafile does not contain SOP partition
while SCP is present.
Reason
Duplicated Partition |
Duplicated Partition: Upgrade failed because either the
metafile or the upgrade file has duplicated partition in
it.