User guide

Speedway Reader IPJ-R1000 for Gen 2 UHF RFID
45
Table 7-12 "show all config" Response Parameters
Parameter Name Format Description
ConfigCategory Network This delimits the network category
DomainStatic STRING The statically set domain
NnsServerAddress<n>Stat IP Address
The nth static DNS server address. n starts
with 1.
NtpServerAddress<n>Stat IP Address
The nth static NTP server address, n starts
with 1.
IpAddressMode
<dynamic |
static>
The IP address mode. Dynamic means DHCP
is used to obtain IP address.
IpAddress IP Address
The IP address of the reader’s Ethernet
interface. Present only if ipAddressMode is
static.
IpMask IP Address
The IP subnet mask of the Ethernet interface.
Present only if ipAddressMode is static.
GatewayAddress IP Address
The default gateway IP address of the Ethernet
interface. Present only if the ipAddressMode is
static.
BroadcastAddress IP Address
The broadcast address of the Ethernet
interface. Present only if the ipAddressMode is
static.
Hostname
STRING The hostname of the reader
DhcpSendHostname <on | off>
Indicates if the “send hostname” option of
DHCP client configuration is turned on
DhcpUserclass DisplayString
Displays the user-class option of the DHCP
client configuration. DisplayString is empty if
this option is not set.
ConfigCategory SystemInfo This delimits the system info category
SysDesc DisplaySring The system description
SysContact DisplaySring The system contact
SysName DisplaySring The system name
SysLocation DisplaySring The system location
ConfigCategory UpgradeAgent This delimits the upgrade agent category
MetafileUri DisplayString The URI of the upgrade metafile
RetrieveMode <pull | push> The upgrade agent‘s metafile retrieve mode
RetrievePeriod INTEGER
The retrieve-period in minutes. Present only if
the RetrieveMode is pull.
ConfigCategory Logging This delimits the logging category
ApplicationLevel
ConfigurationLevel
MgmtLevel
NetworkLevel
RFIDParameters
RFIDSingulation
RFIDAccess
System
<Emergency|
Alert |
Critical |
Warning |
Notice |
Info |
Debug>
The individual component’s syslog logging
level, as returned by the “show logging
summary” command.
SeverityLevel
Same as
above
The syslog logging severity level as set by the
“config logging syslog level” command
SyslogServerAddress1
IP Address or
STRING
The first syslog server as set by the “config
logging syslog add” command.
… … …
SyslogServerAddress<N>
IP Address or
STRING
The last syslog server as set by the “config
logging syslog add” command.