User guide

Speedway Reader IPJ-R1000 for Gen 2 UHF RFID
44
7.5.1.1. show all config
show all config is a summary of the static configuration entries of all categories. The static configuration entries are those that
are manually set via CLI commands. The entries that are obtained via such protocols as DHCP are considered dynamic and are
not displayed. The response of the command is the concatenation of all the static entries from the following four categories:
network, system information, upgrade agent, and logging. Each category is preceded with a delimiter field. The entire
collection of possible parameters is listed in Table 7-12. Note that some parameters are present only when set and applicable.
The command usage for show all config is shown below:
Usage: show all config