User guide

Speedway Reader IPJ-R1000 for Gen 2 UHF RFID
42
The command usage is shown below:
Usage: config network ntp add <server-name>
Usage: config network ntp del <server-name>
Usage: config network ntp delall
A sample of the command and response is shown below:
> config network ntp add yourservername.com
> Status=0,'success'
>
7.4.5. config system Menu
This menu allows configuration of the system identification parameters. Commands are shown below:
Commands:
contact - Configure the system contact.
description - Configure the system description.
location - Configure the system location.
name - Configure the system name.
time - Configure the system time.
exit - Exit this submenu and return to the parent menu.
help - Displays this help message.
. - Exit this submenu and return to the parent menu.
? - Displays this help message.
Sub-menus:
None
All system parameters are entered as strings except for time. Place single quotes around strings that have white space. Time
must be entered in one of the following formats:
MMDDhhmm
MMDDhhmmCCYY
MM.DD-hh:mm:ss
CCYY.MM.DD-hh:mm:ss
CCYY.MM.DD-hh:mm
hh:mm:ss
hh:mm
Usage for the config system commands is shown below:
Usage: config system contact <contact-string>
Usage: config system description <description-string>
Usage: config system location <location-string>
Usage: config system name <system-name-string>
Usage: config system time <correctly formatted time>
A sample config system command is shown below:
config system > location 'a specific location identifier'
Status=0,'Success'
sysDesc="Impinj Speedway"
sysContact="http://www.supplier.com/techsupport"
sysName="speedway-00-00-06"
sysLocation="a specific location identifier"
time="Tue Apr 25 03:59:00 UTC 2006"