User guide

Speedway Reader IPJ-R1000 for Gen 2 UHF RFID

The command usage is shown below:

Usage: config network dns add <server-ip-address>

Usage: config network dns del <server-ip-address>

Usage: config network dns delall

A sample command and response is shown below:

>config network dns add 1.2.3.4

Status=0,'success'

7.4.4.5. config network ip Command

The config network ip command allows the user to statically configure IP settings, or configure the reader to use DHCP. The

commands are described below.

Commands:

dynamic - Set the reader to DHCP for IP address parameters.

static - Set the reader to static IP address parameters.

exit - Exit this submenu and return to the parent menu.

help - Displays this help message.

. - Exit this submenu and return to the parent menu.

? - Displays this help message.

Sub-menus:

None

The parameter table for this command is shown in Table 7-10:

Table 7-10 "config network ip" Command Parameters

Commands Arguments Format Description

static

IpAddress

netmask

gateway-

address

broadcast-

address

Configure the network for static address resolution. The following

combinations of parameters are valid:

<Ip_Address> <netmask> <gateway-address> <broadcast-

address>

For parameters not specified the reader will use default values.

dynamic

Configures the network for dynamic address resolution using the

DHCP protocol.

The usage for this command is shown below:

Usage: config network ip static <ip-address>

Usage: config network ip static <ip-address> <gateway-address>

Usage: config network ip static <ip-address> <netmask> <gateway-address>

<broadcast-adddress>

Usage: config network ip dynamic