User guide

Speedway Reader IPJ-R1000 for Gen 2 UHF RFID
28
7.1. Rshell Overview
Users may navigate to any of the menus simply by entering the menu name at the Rshell prompt, as shown below:
> show network
show network >
At all menus, the help command (or simply ?) will list all the commands available from the active menu, as well as the
submenus that can be accessed from the active menu.
> help
Commands:
osshell - Starts an OS shell for direct access to reader.
reboot - Reboots the system.
exit - Exit this submenu and return to the parent menu.
help - Displays this help message.
? - Displays this help message.
Sub-menus:
config - Submenu of configuration commands.
show - Submenu of elements that may have their configuration or
status shown.
transfer - Submenu of transfer commands.
Menu navigation and the help keyword (or ?) can be combined on the same line to list all the commands available for that
menu. For example:
> config ?
Commands:
access - Changes the password for a given access level.
CLI - Not handled yet
rfid - Not handled yet
exit - Exit this submenu and return to the parent menu.
help - Displays this help message.
. - Exit this submenu and return to the parent menu.
? - Displays this help message.
Sub-menus:
image - Submenu of image and upgrade configuration commands.
logging - Submenu of logging configuration commands.
network - Submenu of network configuration commands.
system - Submenu of system info configuration commands
>
At all menus, entering the help command or ? prior to a command or menu, will return the syntax for its usage. For example:
> ? config
config - Submenu of configuration commands.
Usage: config [<subcommand> ...]
>
or