Operating instructions

Page 14 © American Access Systems
Delete Individual Access Codes -- Sub-Mode 2
To delete programmed Access Codes:
- Enter the Master Code
- Unit will sound a GOOD TONE
- Enter the numeral 2
- Unit will sound a GOOD TONE
- Enter the Access Code you want to delete
- Unit will sound a GOOD TONE
- An ERROR TONE indicates that Access Code is not in the memory
- If you make an entry error, simply press the star (Å) key then enter the correct code
- Continue to enter Access Codes you wish to delete
OR
- Enter pound
(#) to exit the programming mode
NOTES:
- You can delete any Access or Function code that you wish with the exception of the MASTER
CODE.
- If the code you want to delete is not found in memory, the unit will respond with an ERROR
TONE and wait for another code to be entered.
- A GOOD TONE will sound once the code has been found and deleted.
- You may continue deleting codes until you are done, then press the pound
(#) key to exit the
programming mode.
Change the Master Code -- Sub-Mode 3
To change the Master Code:
- Enter the current Master Code
- Unit will sound a GOOD TONE
- Press the numeral 3
- Enter a new Master Code
- Unit will sound a GOOD TONE
- If you make an entry error, simply press the star (Å) key and enter the number you wish
- Press the pound
(#) key to exit the programming mode