Operating instructions

Page 12 © American Access Systems
PROGRAMMING THE DK UNIT
To access the program mode, enter the MASTER CODE. When the correct MASTER CODE is entered
the yellow LED will light and a GOOD TONE will sound. You can now enter any of ten programming
SUB MODES described below.
SUB MODE NUMBER CODE DESCRIPTION
1 Program an Access Code(s) (Relay A)
2 Delete an Access Code
3 Change Master Code
4 Set Sleep Code
5 Set Latch Code
6 Set Relay Output Times
7 Program an Access Code(s) (Relay B)
8 Enable / Disable the "3 Strikes-You’re Out" Feature
9 Program Event Input
0 Erase Memory