Item Brochure
SPECIFICATIONS 32.5 GAL. CLASS "K"
MODEL NUMBER 325R
AGENT TYPE WET CHEMICAL
CAPACITY (GAL. / LITER) 32.5 / 123.02
SHIPPING WT. (LBS.) 460 / 208.65
HEIGHT (IN./CM) 57 / 144.78
WIDTH (IN./CM) 34 / 86.36
DEPTH (IN./CM) 39 / 99.06
DISCHARGE TIME (SEC.) 210
DISCHARGE RANGE (FT./M) 15-20 / 4.57 - 6.1
OPERATING TEMP. (F/C) +32º to 120º / 0º to 49º
NITROGEN CYLINDER
(CU. FT. / LITER)
23 / 651.29
SAFETY BURST DISC RANGE
(PSI / kPa)
400 - 500 / 2760 - 3450
HOSE LENGTH (FT./M) 50 / 15.2
HOSE DIAMETER (IN./CM) 3/4 / 1.91
WHEELS [STEEL] (IN./CM) 36 X 6 / 91.44 X 15.24
UL / FM LISTING N/A
Features:
✭ Exclusive Stainless Steel Agent Cylinder with 4"
Fill Opening and Brass Cap
✭ 23 cu. ft. Nitrogen Cylinder with Quick Opening
"T" Handle Operating Lever
✭ Long Lasting Corrosion Resistant Zinc Epoxy
Primer and Red Polyurethane Paint Finish
✭ Operating Temperature +32°F to + 120°F
✭ Quick Release 3/4" x 50' Discharge Hose with Ball
Type Shut-off Nozzle
✭ Smooth Rolling 36" x 6" Steel Wheels with
Non-sparking Rubber Treaded Tires (not shown)
✭ Large Mylar Labels with Easy to Read Pictogram
Instructions
✭ Six Year Warranty
Model 325R utilizes a Class "K" liquid agent that
contains a special potassium acetate base formula. More
efcient cooking appliances and use of vegetable based
cooking oils require the use of extinguishers with greater
re ghting capacity and cooling effect to combat these very
hot and difcult res. This water based agent extinguisher
also provides excellent capabilities for Class "A" hazards.
The superior re ghting capability of the Wet Chemical
agent is placed exactly where you aim to minimize clean up.
A single wheeled extinguisher will protect a fryer containing
up to 560 gallons of vegetable shortening and is intended
only for appliance protection of large commercial deep fat
fryers. The energy source to the appliance should be shut
off as soon as conditions are safe to do so. Following the
"INSTRUCTIONS" as shown on the nameplate, completely
discharge the extinguisher onto the burning oil to allow
cooling and prevent re-ignition. This extinguisher is not
intended to take the place of a xed re suppression system
for large commercial/industrial cooking operations. This
extinguisher should only be used as supplemental re
protection in addition to a properly installed and designed
automatic re suppression system.
Quality manufactured with an Amerex exclusive stainless
steel agent cylinder, wide footprint 36" X 6" steel wheels
and a 23 cubic foot nitrogen cylinder with a quick opening
"T" handle valve.
WET CHEMICAL EXTINGUISHER
Copyright © Amerex Corporation 2013 SL-112 08/2013
MODEL 325R
32.5 GALLON
WET CHEMICAL
TO BE USED AS SUPPLEMENTAL FIRE PROTECTION ONLY - NOT AS A FIRE SYSTEM