Owner`s manual

SYSTEM INSTALLATION AND SERVICE
AT AND 3T STEAMERS
4211-103 10-10-11
Page 13
ITEM
NUMBER PART NAME DESCRIPTION
1 FRAME CHASSIS
2 TERMINAL POWER INPUT TERMINAL BLOCK
3 COVER FRONT WITH WD LABEL
4 COVER ELEMENT ACCESS
5 TANK TWO OR THREE ELEMENT
6 INSULATION BLANKET
7 BRACKET L-BRACKET
8 NIPPLE DRAIN NIPPLE, 1/2” NPT
9 TERMINAL AUTODRAIN TERMINAL BLOCK
11 CAP CAP, THREAD PROTECTOR
12 LABEL ID AND RATING LABEL WITH ETL MARK
13 PROBE WATER LEVEL PROBE, 3 LEVEL
14 ELEMENT IMMERSION ELEMENT
15 VALVE WATER INLET VALVE
16 CLAMP HOSE CLAMP, SELF TIGHTENING
17 GASKET WATER INLET HOSE
18 BRACKET HOSE CLAMP, AUGER
19 VALVE DRAIN VALVE, MANUAL
20 GASKET ELEMENT GASKET
21 BRACKET MOUNTING BRACKET
22 VALVE PRESSURE RELIEF VALVE
23 PCA CIRCUIT BOARD, AT-3T STEAMER
24 LUG GROUND LUG
28 BOLT 1/4-20 X 1/2”
29 WASHER 1/4” LOCK
33 CONTROL T100
34 CABLE 8 CONDUCTOR CONTROL CABLE, SHIELDED
35 SENSOR TEMPERATURE SENSOR
36 CABLE 2 CONDUCTOR TEMPERATURE SENSOR CABLE
37 STEAM HEAD COMFORT FLO DISPERSION HEAD (NOT SHOWN)
38 PLACARD SAFETY (NOT SHOWN)
39 LABEL WIRE DIAGRAM
40 FUSE FUSE, 100mA SLO-BLO
41 FUSE FUSE, 1A FAST BLO
43 STANDOFF PCA MOUNT, NYLON
44 STANDOFF PCA MOUNT, HEX, ALUMINUM, 6-32
NOTE: 2 element single phase steamer shown, 3 element models are essentially identical.
Technical Support
PO Box 2258
Woodinville, WA 98072
Phone [phone]
FAX [phone]
email: [e-mail]
FOR PARTS AND/OR RETURNS:
• For assistance or parts ordering, please contact your local Dealer or Technical Support at 1-800-363-0251. Please help us to serve you better by:
1. Identifying the problem by using the troubleshooting guide in this manual.
2. Read Number 12, the ID/Ratings Label, to obtain your unit's model and code number.
• When ordering parts, please provide the number, description and quantity needed. When ordering wires or wire assemblies, please describe the wires by color,
location and / or their connection points.
• Do not return any material without fi rst contacting Technical Support for a Return Authorization Number. Freight must be prepaid to Factory.