User manual

605M-D1 GPRS Modem User Manual
man_605M-D1_1.5.doc Page 22
Read Configuration Data from Modem :
The configuration software settings
can be easily populated by reading
values from a pre configured modem.
This is very handy to replicate or
verify configuration data written on the
605M-D1 modem.
To read data from the modem click on
the “Read” command button.
The cursor changes into an hourglass
during the read operation. In case
there is no configuration data present
on the modem (fresh out of box) the
configuration software will indicate
that with an error message.
NOTE: The easiest way to verify read
operation is to set the configuration
software to default values and then
read from the modem. This should
repopulate all the fields with the
values as read from the modem.
Save Configuration Data to File :
Data from the configuration software can be
easily saved to a file on a storage medium.
This feature is very useful for making
backups of the configuration data.
To save configuration data to a file click on,
File > Save Config File from the command
menu. Alternatively you can also press the
shortcut key Ctrl+S.
Now browse to the desired path and choose
a suitable filename from the Save As popup
dialog box.