User manual

Chapter 4 Configuration
Page 21 Dec 2009
planned downtime scenarios where the operators don’t want the modem to continuously retry connection but rather
wait for the reboot SMS to resume connection.
Default Settings :
Sometimes it may be required by the user to
quickly return all the settings in the
configuration software to their factory default
values. This can be easily done by clicking
on the “Defaults” easy access command
button.
WARNING: Using this button will clear all the
fields to default values. Please make sure
you save any custom configuration to avoid
entering it all again.
Write Configuration Data to Modem :
Any settings entered in the configuration software are not actually written to the 605M-D1 modem until you click on
the “Write” command button. Please make sure that the modem is connected and you have AT command mode
before doing this.
A progress bar is displayed indicating the amount of configuration data written to the modem. Once the transfer is
complete you should get a message indicating the successful completion of the process.