Installation manual

9
PureFlow AirDog
AirDog
®
II Demand Flow 2001-2009 DuraMax Diesel
Section 4 AirDog
®
II & Mounting Brackets
Installing the AirDog
®
II & Mounting Brackets on the
Truck’s Frame!
Figure 2 Figure 3
4-1. Assemble the AirDog II mounting bracket to the frame bracket.
Figure 4 Figure 5 Figure 6
4-2. Use the spacer block to clear lines and wiring harnesses on the frame. Adjust the
assembly up or down on the frame bracket as necessary for clearance.
Out to ENGINE FUEL IN
4-3. Install a 3/8” NPT x ½” Jiffy Tite female
quick connect (95182) into the “ENGINE”
and “FUEL IN” ports in the AirDog II.
Figure 7
4-4. Attach the AirDog II to the frame bracket assembly.
Figure 8