Installation manual

4
QUICK CONNECT COMPONENT OVERVIEW
Provided in this kit are two different OE style quick connection systems. These
systems work together to allow for a quick, clean, and professional install.
Jiffy Tite Quick Connect System
Jiffy Tite’s patented quick connect system is used for the connections at the
AirDog
®
. The images below show the flared formation of the Jiffy Tite System.
Simply insert the male end form into the fitting and push firmly until you hear it
“click” into place. To disconnect the system, use a Jiffy Tite tool similar to the
image below. This tool can be purchased at your local auto parts store. Insert the
tool into the connection and turn it ¼ turn to open the retaining spring. While the
retaining spring is open, firmly pull the connection apart.
SAE J2044 Quick Connect System
The SAE J2044 quick connect system is the most commonly used system in the
automotive industry. The images below show the formation of SAE J2044
connection. To connect the assemblies, simply insert the male end form into the
mating female connector. Push firmly until you hear it “click” into place. To
disconnect the fittings, press down and hold the blue tabs on the female connector
while you firmly pull the assembly apart.