Installation manual

17
PureFlow AirDog
AirDog
®
II Demand Flow 2001-2009 DuraMax Diesel
Section 6 Electrical Harness
The AirDog
®
II is equipped with a relay controlled wiring harness.
WIRING DIAGRAM (In Red)
Figure 28
The AirDog
®
II wiring harness!
AirDog®II Pump Motor Lead
Pressure Sensor/Switch Lead
Indicator Light Lead
Battery Positive Lead
Battery Negative Lead
Mini Fuse Tap Relay Lead
Figure 29
CAUTION: If the OPTIONAL Low Pressure Indicator Light is not used, be sure to insulate the
two (2) #10 Indicator Light connectors to prevent accidental contact.
Securing the Relay and Fuse Holder to the Vehicle
6-1. Secure the relay and fuse holder to the vehicle.
Figure 30 Figure 31
Fuel Supply Line
Fuel Module