Installation manual

15
AirDog
®
II Demand Flow 2001-2009 DuraMax Diesel
Section 5-C Fuel Lines
Fuel Suction Line for AirDog
®
II
5C-1. Insert the male Jiffy Tite quick connect end (see figure 24) of the “Suction Hose
Assembly” to the female Jiffy Tite fitting install in the “Fuel In” port during step 4-3 of
this manual. A “click” will be heard when the fitting is properly connected.
Figure 24
5C-2. It may be necessary to remove or bend the metal fuel tank shield (Figure 25) to gain
access to the fuel tank suction line connection.
Figure 25
Fuel Tank Shield
5D-3. Disconnect and remove the original factory suction line. (Figure 26)
Figure 26