Installation manual

12
PureFlow AirDog
AirDog
®
2001-2009 DuraMax Diesel
Section 5A Fuel Lines
5A-3. Attach, by pushing, the female 1/2” SAE J2044 quick connect end (Figure 16) of the
“Pressure Hose Assembly” onto the factory male quick connect that was disconnected in
step 5A-2 (Figure 15). You will hear a “click” when properly connected.
Figure 16
5A-4. Insert the Jiffy Tite male quick connect end (see figure 17) of the “Pressure Hose
Assembly” into the female quick connect fitting previously installed in the port marked
“ENGINE”. You will hear a “click” when properly connected.
Figure 17
5A-5. Any excess fuel hose can be addressed by routing the house in a fashion to take up the
extra length, or a section of the hose can be removed. Push lock splices have been
included if you choose to remove the excess hose.
Figure 18
CAUTION: Properly secure all fuel lines to prevent damage from chaffing
and/or abrasion.