Installation manual

10
PureFlow AirDog
AirDog
®
FP-100 & FP-150 2001-2009 DuraMax Diesel
Section 4 AirDog
®
& Mounting Brackets
Installing the AirDog
®
& Mounting Brackets on the Truck’s
Frame, cont’d!
NOTE: The AirDogII installs easily and is well protected from road debris when mounted on
the inside of the driver’s side frame.
Driver’s Side
Frame Rail.
Figure 9 Figure 10
4-5. Clamp the frame between the AirDogII bracket assembly and the backing plate using
the 3/8” x 4” bolts, lock washers, and nuts included in the kit.
Figure 11 Front of Vehicle
4-6. Position the AirDog® on the frame as necessary for clearance. Properly torque all
fasteners!
NOTE: Be sure to mount the AirDog II so the ‘FUEL IN’ port is directed
toward the front of the vehicle.