Installation guide

SS3GR1028F Series Installation Guide Chapter 1 Introduction
Table 1-3 RJ45 Port LEDs
LED Status Description
On It means port is at link state
Off It means port is not at link state
Green
Blink Send or receive the data
Table 1-4 SFP Port LEDs
LED Status Description
On SFP port is at link state
Off SFP port is not at link state
Left LED
Blink There is no this state
On There is no this state
Off No data is received or sent
Right LED
Blink Send or receive the data
System LEDs of SS3GR1028F are at the right of the front panel.
Table 1-5 SS3GR1028F System LEDs
Panel
Symbol
Status Description
On (Green) Power is operating normally
PWR
Off Power is abnormally
On (Green, blink) System is loading
DIAG
On (Green) System is operating normally
On (Green) System is malfunctioning
ALM
Off System is operating normally
On (Green)
System is using DC power
DC
Off
System does not use DC power
On (Green)
Port1 of M1 is at link state
On (Green,
Blink)
Port1 of M1 is receiving or sending
the data
M1-1
Off
Port1 of M1 is not at link state
On (Green)
Port2 of M1 is at link state
On (Green,
Blink)
Port2 of M1 is receiving or sending
the data
M1-2
Off
Port2 of M1 is not at link state
1-6