Installation guide

SS3GR1028F Series Installation Guide Chapter 1 Introduction
source/destination IP addresses, source/destination MAC addresses, IP protocols,
TCP/UDP, IP precedence, time ranges and ToS. And various policies can be conducted to
forward the traffic. By implementing ACL policies, users can filter the virus packets such as
“Worm.Blaster”, “Worm.Sasser” and “Red Code” etc. Also supports IEEE802.1x port
based access authentication, which can be deployed with RADIUS, to ensure the port
level security and block illegal users.
 QoS
Fully supports DiffServ Module. Users can specify a queue bandwidth on each port.
WRR/SP/SWRR scheduling is also supported. Support the port trust. Users can configure
trusted CoS, DSCP, IP precedence and port priority. User can also modify packet’s DSCP
and COS values. The traffic can be classified by port, VLAN, DSCP, IP precedence and
ACL table. User can also modify packet’s DSCP and IP precedence values. Users can
specify different bandwidths for voice/data/video to customize different qualities of service.
 3D-SMP Ready
Supports a self-defending security region management strategy. It is supported
interaction with some security system such as firewall, IDS, etc. It can defense the virus
and aggress effectively from the extranet and internet. Thus enhance the security and
stability of the network-wide.
 Perfect Web Management.
Support SNMP, In-band and Out-of band Management, CLI and WEB interface and
RMON. It can mail the correlative sensitive information to the administrator abide by
SMTP protocol. Support SSH protocol, ensure the configuration management security of
the switch.
1.3 Physical Specifications
Item SS3GR1028F
Dimension
(W * H * D)
（mm）
440×324×44
Weight <6kg
Fixed ports 12 SFP fiber
ports
12 1000Mb
Combo ports
2 interfaces with
extended card
1-2