Installation guide

SS3GR1028F Series Installation Guide Chapter 1 Introduction
Chapter 1 Introduction
1.1 Overview
The SS3GR1028F series switch are intelligent network management switch used by
the network environment which needs the high performance, the bigger port density and
the convenient installation.
12 fiber ports＋12 Combo ports＋2 extended cards ＋DC power
1.2 Introduction to Product
1.2.1 Product Overview
Front panel of SS3GR1028F supplies 12 1000M-fiber-ports and 12 Combo ports.
Features and Benefits
 Various Interfaces
Provides 12 1000Mb fiber ports, 12 1000Mb Combo ports (1000Mb fiber SFP
ports/1000Mb copper ports) and 2 slots with the extended cards.
 Secure Power Supply
Provides DC/AC power backup, support 220V AC input, 48V DC input or 220V AC,
48V DC input simultaneously.
 Support 10Gb Ethernet
10Gb Ethernet which adopts full-duplex technology instead of low-speed, half-duplex
CSMA/CD protocol, is a big leap in the evolution of Ethernet. 10Gb Ethernet can be
deployed in star or ring topologies. Provide broad bandwidth and powerful processing
capacity. It is suitable for metropolitan networks and wide area networks. Users can
simplify network structures and reduce cost of network construction.
 Networking Protocols
Supports 802.1d/w/s, 802.1Q, 802.1p, 802.3ad, 802.3x, GVRP, DHCP and SNTP etc.
The switches also support the multicast protocols such as IGMP, DVMRP and PIM.
Moreover, this switch series supports RIPv1/2, OSPF, BGP and IPv6 protocols. All these
protocols supported enable this switch series to meet the requirements of complex
network constructions.
 ACL
Support comprehensively ACL policies. The traffic can be classified by
1-1