Installation guide

SS3GR1028F Series Installation Guide Chapter 2 Hardware Installation
Fig 2-1 Install sketch map on the rack
Please mount The SS3GR1028F on the 19’’ rack as below:
1. Attach the 2 brackets on the SS3GR1028F with screws provided in the accessory
kit.
2. Put the bracket-mounted switch smoothly into a standard 19’’ rack. Fasten the
SS3GR1028F to the rack with the screws provided. Leave enough space around the
switch for good air circulation.
Caution!
The brackets are used to fix the switch on the rack. They can’t serve as a bearing.
Please place a rack shelf under the switch. Do not place anything on top of the switch. Do
not block the blowholes on the switch to ensure the proper operation of the switch.
2.3.2 Connecting Console
The SS3GR1028F provides a Mini-USB serial console port.
Fig 2-2 Connecting Console to switch
2-6