Installation guide

SS3GR1028F Series Installation Guide Chapter 1 Introduction
Figure 1-7 panel diagram of SS3GR10SFP
Extended module‘s LED descriptions are in the following:
Table 1-7 LED descriptions of 10Gb extended module
LED Status Description
Green Ports are at link state with 10G
Blink(Green) Ports are at active state with 10G
Link/Activity
Off No link or the link is failure
Table 1-8 XFP, SFP+ transceivers descriptions
Spec
XFP
• XFP-SR transceiver
10GBase-SR XFP multi-mode fiber
transceiver (850nm，62.5μm MMF 32m，50
μ m 500MHz/km MMF 85m ， 50 μ m
2000MHz/km MMF 300m)
• XFP-LR transceiver
10GBase-LR XFP single-mode fiber
transceiver (1310nm,SMF,10km)
• XFP-ER transceiver
1550nm SMF, 40km
• XFP-ER-70 transceiver
1550nm SMF, 70km
SFP+
z SFP+-LR transceiver
10GBase-LR SFP+(1310nm, SMF, 10km)
z SFP+-SR transceiver
10GBase-SR SFP+(850nm, 62.5μm MMF
32m, 50μm 500MHz/km MMF 85m, 50μm
2000MHz/km MMF 300m)
1-9