Installation guide

ManualsBrandsAmer Networks ManualsNetworkingSS3GR1028F

SS3GR1028F Series Installation Guide Content

Content

CHAPTER 1 INTRODUCTION....................................................1-1

1.1 OVERVIEW ..........................................................................................1-1

1.2 INTRODUCTION TO PRODUCT ................................................................1-1

1.2.1 Product Overview ................................................................................. 1-1

1.2.2 Features and Benefits ..........................................................................1-1

1.3 PHYSICAL SPECIFICATIONS..................................................................1-2

1.4 DESCRIPTION OF HARDWARE ...............................................................1-3

1.4.1 Front Panel............................................................................................ 1-3

1.4.2 Back Panel............................................................................................. 1-4

1.4.3 DC Power/PoE Power Input ................................................................. 1-4

1.4.4 Status LEDs........................................................................................... 1-4

1.4.5 Interface Description of Front Panel ...................................................1-7

1.4.6 SS3GR10XFP/SS3GR10SFP+ Extended Module Description ........... 1-8

CHAPTER 2 HARDWARE INSTALLATION ...............................2-1

2.1 INSTALLATION NOTICE.........................................................................2-1

2.1.1 Environmental Requirements .............................................................. 2-1

2.1.2 Installation Notice.................................................................................2-4

2.1.3 Security Warnings ................................................................................ 2-4

2.2 INSTALLATION PREPARATION ...............................................................2-5

2.2.1 Verify the Package Contents................................................................ 2-5

2.2.2 Required Tools and Utilities................................................................. 2-5

2.3 INSTALLATION GUIDE ..........................................................................2-5

2.3.1 Installing Switch.................................................................................... 2-5

2.3.2 Connecting Console............................................................................. 2-6

2.3.3 SFP Transceiver Installation ................................................................ 2-7

2.3.4 SS3GR10XFP Extended Module Installation ...................................... 2-7

2.3.5 SS3GR10SFP+ Extended module Installation.................................... 2-8

2.3.6 SS3GR10SFP Extended module Installation ......................................2-8

2.3.7 Copper Cable/Fiber Cable Connection ...............................................2-8

2.3.8 AC Power Supply Connection ............................................................. 2-9

2.3.9 DC Power Supply Connection ........................................................... 2-10

2.3.10 PoE Power Supply Connection........................................................ 2-10

Summary of content (21 pages)

PAGE 1
SS3GR1028F Series Installation Guide Content Content CHAPTER 1 INTRODUCTION....................................................1-1 1.1 OVERVIEW ..........................................................................................1-1 1.2 INTRODUCTION TO PRODUCT ................................................................1-1 1.2.1 Product Overview ................................................................................. 1-1 1.2.2 Features and Benefits ......................................
PAGE 2
SS3GR1028F Series Installation Guide Chapter 1 Introduction Chapter 1 Introduction 1.1 Overview The SS3GR1028F series switch are intelligent network management switch used by the network environment which needs the high performance, the bigger port density and the convenient installation. 12 fiber ports＋12 Combo ports＋2 extended cards ＋DC power 1.2 Introduction to Product 1.2.1 Product Overview Front panel of SS3GR1028F supplies 12 1000M-fiber-ports and 12 Combo ports.
PAGE 3
SS3GR1028F Series Installation Guide Chapter 1 Introduction source/destination IP addresses, source/destination MAC addresses, IP protocols, TCP/UDP, IP precedence, time ranges and ToS. And various policies can be conducted to forward the traffic. By implementing ACL policies, users can filter the virus packets such as “Worm.Blaster”, “Worm.Sasser” and “Red Code” etc. Also supports IEEE802.
PAGE 4
SS3GR1028F Series Installation Guide Management Chapter 1 Introduction 1 Console port ports System Supports AC/DC power input: power z AC input: The rating voltage range: 100V~240V AC; 50/60HZ The max voltage range: 90V~264V AC; 47HZ～63HZ DC input: z 48V DC input, -48V～-60V/DC; 2.5A Output Do not support power supply of PoE The max 35W Power Consumption Fan Support automatic timing 0℃~50℃ Operating Temperature Relative 10％~90％ Humidity Table 1-1 Physical Specifications 1.
PAGE 5
SS3GR1028F Series Installation Guide Chapter 1 Introduction 1.4.2 Back Panel SS3GR1028F supplies 2 interfaces with the extended card, 1 interface with -48V DC power input and 1 interface with 220V AC power input. Fig 1-2 Back Panel of SS3GR1028F 1.4.3 DC Power/PoE Power Input Supports AC/DC input power backup and PoE power output.
PAGE 6
SS3GR1028F Series Installation Guide Chapter 1 Introduction Table 1-2 Port LEDs LED Red Status Description On On means ports are in the link state of 100M or export PoE power Off Off means ports are not in the link state of 100M or do not export PoE power Blink Send or receive the data On On means ports are in the link state of 1000M Green Off Off means ports are not in the link state of 1000M Blink Send or receive the data The other is system LEDs, they are used to show the work status
PAGE 7
SS3GR1028F Series Installation Guide Chapter 1 Introduction Table 1-3 RJ45 Port LEDs LED Green LED Left LED Right LED Status Description On It means port is at link state Off It means port is not at link state Blink Send or receive the data Table 1-4 SFP Port LEDs Description Status On SFP port is at link state Off SFP port is not at link state Blink There is no this state On There is no this state Off No data is received or sent Blink Send or receive the data System LEDs of SS3G
PAGE 8
SS3GR1028F Series Installation Guide Chapter 1 Introduction Port2 of M1 is not at link state, but On (Orange) M1 is in place M2-1 M2-2 On (Green) Port1 of M2 is at link state On Blink) Port1 of M2 is receiving or sending (Green, the data Off Port1 of M2 is not at link state On (Green) Port2 of M2 is at link state On Blink) Port2 of M2 is receiving or sending (Green, the data Off Port2 of M2 is not at link state Port2 of M2 is not at link state, but On (Orange) M2 is in place 1.4.
PAGE 9
SS3GR1028F Series Installation Guide Chapter 1 Introduction 1.4.6 SS3GR10XFP/SS3GR10SFP+ Extended Module Description Provides 2 slots to install 2 SS3GR10XFP, SS3GR10SFP+, or SS3GR10SFP extended modules.
PAGE 10
SS3GR1028F Series Installation Guide Chapter 1 Introduction Figure 1-7 panel diagram of SS3GR10SFP Extended module‘s LED descriptions are in the following: Table 1-7 LED descriptions of 10Gb extended module LED Link/Activity Status Description Green Ports are at link state with 10G Blink(Green) Ports are at active state with 10G Off No link or the link is failure Table 1-8 XFP, SFP+ transceivers descriptions Spec XFP SFP+ • XFP-SR transceiver 10GBase-SR XFP multi-mode fiber transceiver (850
PAGE 11
SS3GR1028F Series Installation Guide Chapter 2 Hardware Installation Chapter 2 Hardware Installation 2.1 Installation Notice To ensure the proper operation and your physical security, carefully the following installation guide. 2.1.1 Environmental Requirements The switch must be installed in a clean area. Otherwise, the switch may be damaged by electrostatic adherence. Maintain the temperature within 0 to 50 °C and the humidity within 10% to 95%, non-condensing.
PAGE 12
SS3GR1028F Series Installation Guide Chapter 2 Hardware Installation harmful gases will aggravate metal corrosion and the aging of some parts. The site should avoid harmful gases, such as SO2, H2S, NO2, NH3 and Cl2, etc. The table below details the threshold value. Gas Average (mg/m³) Max (mg/m³) SO2 0.2 1.5 H2S 0.006 0.03 NO2 0.04 0.15 NH3 0.05 0.15 Cl2 0.01 0.3 Table 2-2 Environmental Requirements: Particles 2.1.1.
PAGE 13
SS3GR1028F Series Installation Guide Chapter 2 Hardware Installation may occur during an air-conditioning system failure, and normal operation conditions should be recovered within 5 hours. 2.1.1.3 Power Supply Before powering on the power supply, please check the power input to ensure proper grounding of the power supply system. The input source for the switch should be reliable and secure; a voltage adaptor can be used if necessary.
PAGE 14
SS3GR1028F Series Installation Guide Chapter 2 Hardware Installation rack, please ensure good ventilation for the rack. Every device in the rack will generate heat during operation, therefore vent and fans must be provided for an enclosed rack, and devices should not be stacked closely. When mounting devices in an open rack, care should be taken to prevent the rack frame from obstructing the switch ventilation openings.
PAGE 15
SS3GR1028F Series Installation Guide Chapter 2 Hardware Installation power immediately. Caution! Potential risk include: Electric leakage, Power supply arcing, Power line breakage, Imperfect earth, Overload circuit and Electrical short circuit. If electric shock, fire, electrical short circuit occurs, please cut off the electricity supply and alarm rapidly.
PAGE 16
SS3GR1028F Series Installation Guide Chapter 2 Hardware Installation Fig 2-1 Install sketch map on the rack Please mount The SS3GR1028F on the 19’’ rack as below: 1. Attach the 2 brackets on the SS3GR1028F with screws provided in the accessory kit. 2. Put the bracket-mounted switch smoothly into a standard 19’’ rack. Fasten the SS3GR1028F to the rack with the screws provided. Leave enough space around the switch for good air circulation. Caution! The brackets are used to fix the switch on the rack.
PAGE 17
SS3GR1028F Series Installation Guide Chapter 2 Hardware Installation The connection procedure is shown below: 1. Find the console cable provided in the accessory kit. Attach the Mini-USB end to console port of the switch. 2. Connect the other side of the console cable to a character terminal (PC). 3. Power on the switch and the character terminal. Configure the switch through the character terminal. 2.3.3 SFP Transceiver Installation SS3GR1028F provide multiple 1000Mb SFP transceiver slots.
PAGE 18
SS3GR1028F Series Installation Guide Chapter 2 Hardware Installation 2.3.5 SS3GR10SFP+ extended module Installation The SS3GR1028F series provide 10Gb slots. The procedure for installing the SS3GR10SFP+ module and the SFP+ 10Gb fiber transceiver is shown below: Step 1: Put on an ESD wrist strap (or antistatic gloves). Step 2: Insert the SS3GR10SFP+ module to the guide rail inside the 10Gb module slot.
PAGE 19
SS3GR1028F Series Installation Guide Chapter 2 Hardware Installation Step 1: Insert one end of the Ethernet cable to the RJ-45 Ethernet port in the copper cable line card of the switch; Step 2: Insert the other end of the Ethernet cable to the RJ-45 Ethernet port of other device; Step 3: Check all status indicators for the corresponding ports; a lighted LED indicates that the link has been established, otherwise the link is not ready and the cable should be examined.
PAGE 20
SS3GR1028F Series Installation Guide Chapter 2 Hardware Installation socket (with overload and leakage protection), and the other end to the power socket in the back panel of the switch. 2. Check the power status indicator in the front panel of the switch. The corresponding power indicator should light. The SS3GR1028F series is self-adjustable for the input voltage. As soon as the input voltage is in the range printed on the switch surface, the switch can operate correctly. 3.
PAGE 21
SS3GR1028F Series Installation Guide Chapter 2 Hardware Installation supply normally. Caution! The input voltage must be within the required range, otherwise the switch can be damaged or malfunction. PoE power supply of the front port is disabled when the switch is power-off or is not started. If there is any problem, do not open the switch shell without permission. It can cause physical injury.