User manual

SS2R24G4i/SS2R48G4i
60
The configurations of SS2R24/48G4i switch switch as FTP and TFTP clients are almost the same,
so the configuration procedures for FTP and TFTP are described together in this manual.
5.5.2.2.1 FTP/TFTP Configuration Task List
1. FTP/TFTP client configuration
Upload/download the configuration file or system file.
（1） For FTP client, server file list can be checked.
2. FTP server configuration
（1） Start FTP server
（2） Configure FTP login username and password
（3） Modify FTP server connection idle time
（4） Shut down FTP server
3. TFTP server configuration
（1） Start TFTP server
（2） Configure TFTP server connection idle time
（3） Configure retransmission times before timeout for packets without acknowledgement
（4） Shut down TFTP server
1. FTP/TFTPconfiguration
(1)FTP client upload/download file
Command Explanation
Admin Mode
copy <source-url> <destination-url>
[ascii | binary]
FTP/TFTP client upload/download file
Global Mode
Dir <ftpServerUrl>
For FTP client, server file list can be
checked.
FtpServerUrl format looks like ftp //user
password@IP Address
2.FTP server configuration
(1)Start FTP server
Command Explanation
Global Mode
ftp-server enable
no ftp-server enable
Start FTP server, the “no ftp-server enable”
command shuts down FTP server and
prevents FTP user from logging in.
(2)Set usename and password for FTP logging in
Command Explanation
Global Mode
ip ftp-server username <username>
password {0|7} <password>
no ip ftp-server username <username>
Set FTP server ‘s username and
password when logging in.