User manual

SS2R24G4i/SS2R48G4i

the switch

5.2.5.11 show tcp

Command show tcp

Function Display the current TCP connection status established to the switch.

Command mode Admin Mode

5.2.5.12 show udp

Command show udp

Function Display the current UDP connection status established to the switch.

Command mode Admin Mode

5.2.5.13 show telnet login

Command show telnet login

Function Display Telnet user information that links with the switch

5.2.5.14 show telnet user

Command show telnet user

Function Display all Telnet user information that can login the switch via Telnet.

Relative Command telnet-user password

5.2.5.15 show version

Command show version

Function Display the switch version.

Command mode Admin Mode

5.2.6 Debug

All the protocols SS2R24/48G4i switch switch supports have their corresponding debug

commands. The users can use the information from debug commands for troubleshooting. Debug

commands for their corresponding protocols will be introduced in the later chapters.

5.3 Configure the IP Address of the Switch

In theory, SS2R24/48G4i switch switch is a layer 2(Data Link Layer)device, which should not have

an IP address, because IP address is a concept belonged to layer 3(Network Layer).But, as a device

used in network, switch needs a network address to be its unique identifier, so that the network

manager can identify and control it.