User manual

SS2R24G4i/SS2R48G4i
36
Command reload
Function Warm reset the switch.
Command mode Admin Mode
set default
Command set default
Function Reset the switch to factory settings.
Command mode Admin Mode
5.1.9 setup
Command setup
Function Enter the Setup Mode of the switch.
Command mode Admin Mode
5.1.10 language
Command language {chinese|english}
Function Set the language for displaying the help information.
Parameter Chinese for Chinese display; English for English display.
Command mode Admin Mode
Default The default setting is English display.
5.1.11 web-user
Command web-user <username> password {0|7} <password>
no web-user <username>
Function To set a username and its password for a Web client; the “no web-user <username>”
command is used to delete this Web client.
Parameters <username>is an authorized username to do Web access, whose length should be no
more than 16 characters; <password> is the access password, no longer than 8 characters; 0|7
respectively indicate to display the original or the encrypted password.
Command Mode Global configuration mode.
Relative Command ip http server
5.1.12 write
Command write
Function Save the currently configured parameters to the Flash memory.
Command mode Admin Mode