User manual

SS2R24G4i/SS2R48G4i
35
Command exit
Function to quit from the current mode quit and return the previous mode. By this command, users
being in global mode will return to admin configuration mode; users being admin mode will return to
user mode.
Command mode All Modes
5.1.4 help
Command help
Function Output brief description of the command interpreter help system.
Command mode All Modes
5.1.5 ip host
Command ip host <hostname> <ip_addr>
no ip host <hostname>
Function Set the mapping relationship between the host and IP address; the “no ip host” parameter
of this command will delete the mapping.
Parameter <hostname> is the host name, up to 15 characters are allowed; <ip_addr> is the
corresponding IP address for the host name, takes a dot decimal format.
Command mode Global Mode
Relative command telnet、ping、traceroute
5.1.6 ip http server
Command ip http server
no ip http server
Function To enable the Web configuration; the “no no ip http server” command is used to disable the
Web configuration.
Command Mode Global mode.
Relative Command web-user.
5.1.7 hostname
Command hostname <hostname>
Function Set the prompt in the switch command line interface.
Parameter <hostname> is the string for the prompt, up to 30 characters are allowed.
Command mode Global Mode
Default The default prompt is related to SS2R24/48G4i switch switch type.
5.1.8 reload